4) You will need to have on hand slow drain tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.
The repair of a ballcock tube is the simplest repair of all toilet leaks. There is a small black tube that is in the tank of the toilet that connects to the flush valve fill tube. If the tube slips from the little clasp that holds it in place, it can begin spraying water line repair in the tank and out from under the tank cover. To fix this toilet leak, simple re-attach the black tube to the clip. It really is that simple.
In repairing a tub faucet, you will notice that there will be drips that you need to address to. With this, you will need to replace the washers and/or seats.
Depending on your repair job you might need a bucket that will fit below the sink trap, as well as some rags and newspaper. Masking tape is useful for labeling and for wrapping around the heads of the wrench to protect your chrome tap handles. Rubber gloves are recommended, particularly when working with the toilet, but there are greases and glues that you may not want on your hands.
One tip is to avoid hiring a plumber, who is a part or who is representing a company. They usually work on a commission basis. The company usually has a flat rate for every plumbing service and the plumber's commission will be added up to the company's charge. This is one of the main reasons why some plumbers charge you with a ridiculously high amount of money for their services. Opt for freelance water line repair plumbers instead. They work for themselves, so the price is usually negotiable.
The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.
Be sure to choose a licensed glass shop in your area. There are a lot fly by night shops out there. You pay a lot of money for your vehicles so you want quality work at a fair price. Do the homework before you have this procedure done because proper preparation before installing a windshield will keep your car from having rust issues which may cause water leaks.